Vector Laboratories is closed for the President’s Day on Monday, February 19th. We will be back in the office on Tuesday, February 20th.
We will respond to emails upon our return. Have a wonderful day.
“My staining didn’t work” is a common lament among novice and expert scientists alike performing immunohistochemistry (IHC) and immunofluorescence (IF). A particular nuisance in immunostaining is the appearance of background staining, which is the non-specific staining of tissue and cell elements by colorimetric or fluorescence dyes. Researchers have difficulty identifying the source of the background staining because IHC and IF experiments involve multiple reagents including the tissue fixatives, blocking solutions, primary/secondary antibodies, and detection reagents. In this post we will discuss common sources of background staining and offer tips and tricks for resolving these issues.
This blog post will be the first of a three-part series intended to help researchers overcome different parts of the IHC and IF staining processes that might present challenges, so be sure to stay tuned for other insights that could help your workflow achieve better staining results.
In IHC and/or IF, tissues are fixed with reagents prior to immunostaining and visualization to preserve the tissue and the molecular processes occurring in the specimen. This process helps researchers more easily probe proteins, transcription factors, DNA and/or RNA to study internal cellular processes. During fixation— particularly with aldehyde-based reagents—the hydrophobicity of tissue proteins is increased because a chemical reaction during the fixation process causes cross-linking of reactive epsilon- and alpha-amino acids within and between adjacent tissue proteins (1). This hydrophobicity can contribute to increased background staining in IHC protocols or autofluorescence, which is when biological specimens naturally emit light after absorbing light when visualized under a fluorescent microscope, in IF-based experiments (2).
The fixation duration, formulation and tissue-to-fixative ratio can impact the degree of nonspecific background staining and autofluorescence (3). For example, the tissue-to-fixative ratio, as well as short fixation times, can cause incomplete fixation with cross-linking only occurring at the edges of the tissue, leaving the center relatively unfixed. This can result in uneven staining, with more intense background staining in the center of the tissue (4). Additionally, over-fixation of a sample can contribute to high tissue autofluorescence (5).
The researcher should test different fixative reagents, incubation times and tissue-to-fixative ratios in order to determine which is best for their application or search the published literature for methods that are validated with similar tissue types.
Tissues can contain varying levels of extracellular elements like elastin, collagen, red blood cells, and lipofuscin. Like fixation, these structures can contribute to high autofluorescence and obscure specific signal from probes and stained targets.
Utilizing an autofluorescence quenching reagent, such as Vector® TrueVIEW® Autoflurorescence Quenching Kit can reduce background introduced both by tissue components and from aldehyde fixation as discussed above. TrueView is an aqueous solution of a hydrophilic molecule that binds electrostatically to non-lipofuscin sources of autofluorescence like collagen, elastin, and red blood cells, effectively reducing their intrinsic fluorescent signal. To learn more about how TrueVIEW could help overcome autofluorescence in your workflow, check out our blog post, How to improve your immunofluorescence by overcoming autofluorescence.
Another possible solution for autofluorescence is Sudan Black, a fat-soluble dye with a high affinity for lipids. It can be used for lipofuscin sources of autofluorescence, although the mechanism for this effect is still unknown (6).
High background can occur because of oversaturation of the target epitope with primary antibody during immunostaining. A thorough titration of antibody alongside a positive control of known target expression is a helpful test to elucidate optimal signal-to-noise in the sample (7). The antibody staining concentration that often yields highly specific staining with the least amount of background can be less concentrated than recommended by manufacturers, so it is important for an individual to determine the best concentration in-house for their application (8).
Cross reactivity of the primary antibody with other tissue epitopes can cause non-specific staining, therefore an appropriate blocking agent such as BSA (Bovine Serum Albumin), normal serum, or nonfat dry milk is important to ensure proper labeling.
Species-on-species immunostaining refers to utilizing a primary antibody raised in the same species as the target tissue. If a primary antibody is raised in the same species as the tissue (e.g., a mouse primary antibody and mouse tissue), it is important to use a compatible species-on-species blocking reagent to prevent the generation of a non-specific signal from tissue immunoglobulin (Ig) alongside your primary target. Reagents such as M.O.M.® (Mouse on Mouse) Blocking Reagent or H.O.H.™ (Human on Human) Immunodetection Kit are suitable in these scenarios.
The secondary antibody can also contribute to background staining. The cause is often non-specific binding to endogenous Ig in the tissue—particularly in the previously described species-on-species experiments.
In the case of a mouse-raised primary antibody used on mouse tissue, the secondary antibody also needs to target mouse (i.e., an anti-mouse Ig), but the secondary antibody can potentially bind to the endogenous Ig in the mouse tissue, causing background staining. Blocking the tissue with an endogenous Ig species-on-species blocking reagent can effectively eliminate any concerns of the secondary antibody binding to the tissue.
An anti-mouse IgG secondary may also bind Ig in rat tissue due to the similarity in species. To prevent non-specific signal generation in this case, a species-adsorbed secondary antibody, such as a rat-adsorbed anti-mouse IgG from the previous example, can be utilized as an effective option to prevent cross-reactivity (9).
For suspected cross-reactivity, an alternative is to add 2% or higher concentration of normal serum of the same species as the tissue to the secondary antibody diluent. If that does not work, the secondary antibody concentration can be reduced to minimize background staining.
A general method for determining if the source of background staining is due to non-specific binding of the secondary antibody is to test a “deletion control.” To perform deletion control, simply follow the staining protocol for the tissue but omitting the primary antibody. Considerable staining in this control would indicate that the staining is non-specific and potentially originating from the secondary antibody binding to endogenous immunoglobulins in the tissue or to other off-target antigens. That being said, further deletion controls (i.e., where both the primary and secondary antibodies are omitted) are needed to indicate if the background staining is actually coming from the secondary antibody.
The detection system for IHC often involves an avidin-biotin complex for amplification of the target signal. A deletion control with both the primary and secondary antibodies omitted would demonstrate the contribution of this detection reagent to any background signal. Positive staining in this deletion control would indicate non-specific binding of the detection reagents, and the tissue would most likely need an avidin/biotin blocking step to prevent the reagents from binding to endogenous biotin in the sample. This is particularly apparent in certain tissues that have elevated levels of endogenous biotin like the kidney, liver, and brain (10).
Substrate
If IHC background staining occurs after the addition of the substrate alone, then it is possible that endogenous enzyme in the tissue is developing the chromogen. For example, several tissues have considerable amounts of endogenous peroxidase including the liver, spleen, tonsil, lymph nodes, and kidney (11). For horseradish peroxidase (HRP) systems, an appropriate blocking reagent for endogenous enzyme is hydrogen peroxide. For alkaline phosphatase (AP) systems, levamisole can be added to the secondary antibody diluent.
Some reagents, such as BLOXALL® Endogenous Blocking Solution, can quench endogenous activity from both alkaline phosphatase and peroxidases, making multiple enzyme detection in one experiment possible.
We hope the above tips were helpful and get you on the road to better staining. For more tips and tricks to improve your staining, check out our IHC and IF Resources, and stay tuned for more help on the blog.
Stay in the Loop. Join Our Online Community
©Vector Laboratories, Inc. 2024 All Rights Reserved.